FORMULA
How to convert
Convert °C to the base scale, then apply the °F scale and offset.Example: 10 °C = 50 °F.
°C → °F
Convert degrees Celsius to degrees Fahrenheit with an exact, deterministic calculation.
1 °C = 33.8 °F
FORMULA
Convert °C to the base scale, then apply the °F scale and offset.Example: 10 °C = 50 °F.
QUICK ANSWER
33.8 °F
REFERENCE TABLE
| degrees Celsius | degrees Fahrenheit |
|---|---|
| 1 °C | 33.8 °F |
| 5 °C | 41 °F |
| 10 °C | 50 °F |
| 25 °C | 77 °F |
| 50 °C | 122 °F |
| 100 °C | 212 °F |
ABOUT THIS CONVERSION
Celsius and Fahrenheit have different zero points and degree sizes. The converter multiplies Celsius by 9/5 and then adds 32; it cannot use a simple factor through zero as length or mass conversions do.
A temperature of 20 °C is 68 °F, a typical mild indoor or outdoor temperature. Weather stations and thermostats may round to whole degrees, so their displayed reverse conversion may differ slightly.
Weather and room temperatures usually need no more than one decimal place. Laboratory work should follow instrument uncertainty. Preserve the offset calculation before rounding; rounding the intermediate Celsius or kelvin value can shift the final answer.
Most countries report everyday temperature in Celsius, while the United States commonly uses Fahrenheit. Scientific standards use kelvin without the degree sign. Recipe temperatures must be checked for both scale and oven behavior.
Do not only multiply by 1.8; the 32-degree offset is essential. Also remember that a change of 1 °C equals a change of 1.8 °F even though the absolute readings need the offset.
Definitions and sources are listed below. Calculations retain more precision than the default display and round only for presentation.
USEFUL ANSWERS
They have the same numerical value at −40 degrees.
The scales use different reference points: water freezes at 0 °C and 32 °F under standard conditions.
Enter the °C value in the calculator. It applies the scale offsets shown in the formula and returns the equivalent in °F; the formula and common-value table are shown on this page.
Defined measurement relationships are calculated with decimal arithmetic from stored standards. The displayed answer may be rounded for readability. Currency results instead depend on the dated reference rate shown.
FROM UNIT
Degrees Celsius use the same interval as kelvin, with 0 °C equal to 273.15 K. Its stored scale and offset express readings as kelvin before conversion.
BIPM SI Brochure and exact international definitions ↗Definition verified 14 August 2026TO UNIT
The Fahrenheit scale places water's freezing point at 32 °F and boiling point near 212 °F at standard pressure. Its stored scale and offset express readings as kelvin before conversion.
BIPM SI Brochure and exact international definitions ↗Definition verified 14 August 2026Content reviewed by Akhil Saroop · 16 August 2026 · Report an error on this page