FORMULA
How to convert
L = gal × 3.785411784Example: 10 gal = 37.85411784 L.
GAL → L
Convert US gallons to liters with an exact, deterministic calculation.
1 gal = 3.785411784 L
FORMULA
L = gal × 3.785411784Example: 10 gal = 37.85411784 L.
QUICK ANSWER
3.785411784 L
REFERENCE TABLE
| US gallons | liters |
|---|---|
| 1 gal | 3.78541178 L |
| 5 gal | 18.92705892 L |
| 10 gal | 37.85411784 L |
| 25 gal | 94.6352946 L |
| 50 gal | 189.2705892 L |
| 100 gal | 378.5411784 L |
ABOUT THIS CONVERSION
This route converts US liquid gallons to liters using the exact definition 1 US gal = 3.785411784 L. It is appropriate for US fuel economy, tank capacity, and liquid packaging, but not Imperial gallons.
A 2 US gal container holds 7.57082357 L. Usable tank capacity can differ from its nominal label, which is a product specification issue rather than a conversion error.
For packaging, round to the labeled container precision. Laboratory and dosing work must follow calibrated equipment and required tolerances. Keep full precision during the conversion and round only after the final unit is chosen.
A US liquid gallon is not an Imperial gallon, and their fluid ounces differ. Every customary entry here is labeled as US where ambiguity matters; the plain fluid-ounce entry uses the US liquid definition.
Do not use 4.54609 unless the source explicitly says Imperial or UK gallon. Mixing gallon systems causes an error of about twenty percent.
Definitions and sources are listed below. Calculations retain more precision than the default display and round only for presentation.
USEFUL ANSWERS
Five US liquid gallons equal exactly 18.92705892 liters.
Yes. Retail motor fuel in the United States is measured in US liquid gallons.
Enter the gal value in the calculator. It applies the stored factor and offset definitions and returns the equivalent in L; the formula and common-value table are shown on this page.
Defined measurement relationships are calculated with decimal arithmetic from stored standards. The displayed answer may be rounded for readability. Currency results instead depend on the dated reference rate shown.
FROM UNIT
The US liquid gallon is exactly 231 cubic inches, equal to 3.785411784 liters. It measures three-dimensional capacity; customary liquid units use the labeled US definition.
NIST Guide to the SI, SP 811 ↗Definition verified 14 August 2026TO UNIT
The liter (L) is a non-SI unit accepted for use with SI and equals exactly one cubic decimeter. It measures three-dimensional capacity; customary liquid units use the labeled US definition.
NIST Guide to the SI, SP 811 ↗Definition verified 14 August 2026Content reviewed by Akhil Saroop · 16 August 2026 · Report an error on this page